Keramisk lackförsegling

Keramisk lackförsegling ger lacken ett fantastiskt skydd mot repor och smuts. CERAMIC ARMOR COAT skyddar mot UV strålar och och oxidering. Det är bästa sätt att ta hand om din bil.

949.00 kr

 

Keramisk lackförsegling ger lacken ett fantastiskt skydd mot repor och smuts. CERAMIC ARMOR COAT skyddar mot UV strålar och och oxidering. Det är bästa sätt att ta hand om din bil. 

OBS! Glöm inte att handla Glasförsegling Nanowiper för din vindrutan

CERAMIC ARMOR COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Even more surfaces, coated with CERAMIC ARMOR COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with Keramisk lackförsegling CERAMIC ARMOR COAT™.

Above all CERAMIC ARMOR COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Moreover surfaces, coated with CERAMIC ARMOR COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with CERAMIC ARMOR COAT™.

AREAS OF APPLICATION:

Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.), with painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces. Coating is not suitable for chrome, painted plastic parts without lacquer. Freshly painted parts can be coated, but no earlier than after 2 months of painting. This product is applicable to all lacquered painted plastic surfaces.

Keramisk lackförsegling APPLICATION INSTRUCTIONS (Read before starting the coating process):

Surface preparation

Firstly, prepare the surface properly prior coating. It is advised to fully wash the car, apply clay bar, polish with appropriate and required cutting compounds and machines, use silicon-removing cleaners, wash car again and dry the car until it’s fully dry. Secondly, Ensure that there’s no risk of water dripping onto partly cured coating. It is recommended to use a strong air stream to blow any excess water from trim areas. If water does drip onto partially cured coating, we recommend re-polishing the affected area and reapplying the CERAMIC ARMOR COAT™. In addition, surface, prepared for application, must be dry and free of any dirt, water and detergent residues.

 

Technical charasteristics and data:

 

Product volume40 ml
Areas of useAutomobiles, motorcycles, yachts
Coating durability12 months / 50 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions;

36 months / 150 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions;

Temperature resistanceup to 150 °C
Chemical resistance12>Ph>1
Product efficiency4-5 ml/m2
Thickness of the coating700-1000 nm
Scrach durability9H (“pencil test”)
Shelf life12 months
 Storage conditions-3 °C to +30 °C, keep away from children
Curing period6 hours after coating process surface must be protected from water, low temperatures and dirt;

after 48 hours period coating fully cures and hardness test can be applie

Keramisk lackförsegling

Share on facebook
Share on google
Share on twitter
Share on linkedin